Vertical Flame Tester
Compliance
ISO 6940, ISO 6941, ISO 15025, ECE R118
The Vertical Flame Tester is designed to measure the flame spread times of vertically oriented textile fabrics and industrial products in the form of single or multi-component fabrics (coated, quilted, multilayered, sandwich combinations, and similar combinations) when subjected to a small, defined flame.
Test Principle:
A defined flame from a specified burner is applied for 10s to the surface or the bottom edge of textile specimens that are vertically oriented. The flame spread times in seconds for the flame front to travel between marker threads positioned adjacent to the surface of the test specimen and located at three distances from the igniting flame, are recorded.
Features
The Vertical Flame Tester consists of a test flame, burner, time recording device, and control cabinet.
The tester is separated to the test frame and control cabinet to obtain a safety and flexible installation.
The test frame is stainless steel made, and the sample holder is copper made.
Standard burner, equips with spark ignitor and angle turning device, automatic turn to 0, 45, 90 degrees.
Flame apply time is adjustable and auto cut off.
Time recording device, auto record the time of flame spread to 1st, 2nd, 3rd line.
Equip with PLC controller and English interface.
Multiple test mode is available , such as ISO 6941, ISO 15025, ECE R118.
Advance
Advanced Edition Vertical Flame Tester
Floor standing test rig.
PLC control.
Auto impingement burner.
Auto time recording device.