Corrosion Test Apparatus

Compliance

IEC 60754-1/2

The Corrosion Test Apparatus is developed to assess the amount of acid gas generated from the combustion of materials by measuring the pH & electrical conductivity.

The test specimen is pushed into a tube furnace and burned for 30 minutes. The generated gases are forwarded to the wash bottles with demineralized water. The pH value and conductivity are measured.

 

Features

  • Split-type tube furnaces for material combustion.

    - Dual shell housing made of textured stainless steel sheet.

    - Fan cooling for low surface temperature.

    - Heating temperature up to 1100°C.

    - Split-type design for simple insertion of the working tube.

    - Single-zoned design, switchgear, and control unit integrated with the furnace housing.

  • High temperature quartz glass tube, diameter close to the tube furnace.

  • Mass flow meter controls the air supply, supply flow up to 3L/min.

  • The airflow is displayed by a digital meter, with a resolution of 0.1L/min.

  • Provides a digital timer to set the air supply time.

  • Provides drying device to get dried air supply.

  • Provides 30 ceramic sample boats.

  • Provides magnetic stirrers.

  • pH Meter, measurement range from -2.00 to 19.99 pH, with an accuracy of 0.1/0.01pH.

  • Conductivity meter, measuring range from 0.00 to 20.00 μS/cm, with an accuracy of 0.01 μS/cm.